Who needs paintless dent removal? [Archive]

S2k Dude

11-03-2004, 09:58 AM

Weekend before last at the Butler Tire open house a paintless dent removal shop setup a display. I spoke with the two men in the both and decided to have them give me an estimate for my car.

I had three dents, one in the hood from an acorn drop, one in the passenger door from a moron in a parking lot, and one in the driver side front fender (near the S2000 badge) from another moron.

The shop quoted me $125 to remove all three dents ($40+$45+$40) plus they offered an additional 10% open house discount if I had them do the service at the show so the total cost was only $112.50. I decided to have them do the work and I'm glad I did. Every dent was removed, you could not see where any of the dents had been. They didn't even have to drill one hole or take apart anything more than the plastic fender well piece to get at one of the dent.

These guys did a frickin' AWESOME job. Turns out one guy used to work for dent wizard and is considered a master level technician.

If I took my business to Dent Wizard the cost would have easily been more than double, even with the club discount. We should talk to these guys about becoming a club sponser.

So my question is, who needs paintless dent removal? I'd be willing to call up the shop and coordinate a "Dent Removal Day" for club members and see if we can get the same discounts that was offered at the Butler Tire open house.

Here is the info for the shop that did such great work (and cheap):
Precision Dent & Detail Services
Lawrenceville, GA
404-784-5281
Chuck or Jeremy
http://www.precisiondent.com/
http://www.detailatlanta.com/

If we get enough people interested I can setup something for this weekend. Maybe I'll sponsor the open house and we can also Zaino the cars and drink some beer while the paintless dent repairs are going on.

Tentative Date for the Group Dent Repair is September 3rd.

Participants
S2k Dude - S2000 w/1 dent, CR-V w/ 1 dent
S2kool - 1 dent?
S2kjd - 2 dents (rear quarters)
Glenard127
KatJ - 1 dent
Johnnyboy
AlS2000 - 1 dent

s2kjones

11-03-2004, 10:00 AM

I have a huge ding in the drivers side door...but I wanted to keep it. It's a reminder of my 1st date with Wendy :D

WebGod

11-03-2004, 10:39 AM

I have a huge ding in the drivers side door...but I wanted to keep it. It's a reminder of my 1st date with Wendy :D
OMFG!!!

tmelch

11-03-2004, 10:43 AM

I have 3 dents I'd like to get fixed.

F8d2Blk

11-03-2004, 11:12 AM

I have a few. December would be better for me.

wpriller7

11-03-2004, 12:06 PM

If you setup an open house, please let me know the date and time. Will they be offering discounts at the open house and are they cheaper than Dent Wizard?:fro:

Weekend before last at the Butler Tire open house a paintless dent removal shop setup a display. I spoke with the two men in the both and decided to have them give me an estimate for my car.

I had three dents, one in the hood from an acorn drop, one in the passenger door from a moron in a parking lot, and one in the driver side front fender (near the S2000 badge) from another moron.

The shop quoted me $125 to remove all three dents ($40+$45+$40) plus they offered an additional 10% open house discount if I had them do the service at the show so the total cost was only $112.50. I decided to have them do the work and I'm glad I did. Every dent was removed, you could not see where any of the dents had been. They didn't even have to drill one hole or take apart anything more than the plastic fender well piece to get at one of the dent.

These guys did a frickin' AWESOME job. Turns out one guy used to work for dent wizard and is considered a master level technician.

If I took my business to Dent Wizard the cost would have easily been more than double, even with the club discount. We should talk to these guys about becoming a club sponser.

So my question is, who needs paintless dent removal? I'd be willing to call up the shop and coordinate a "Dent Removal Day" for club members and see if we can get the same discounts that was offered at the Butler Tire open house.

Here is the info for the shop that did such great work (and cheap):
Precision Dent, LLC
Lawrenceville, GA
404-784-5281
Dominique Higgs - Master Tech.
http://www.precisiondent.com/

If we get enough people interested I can setup something for this weekend. Maybe I'll sponsor the open house and we can also Zaino the cars and drink some beer while the paintless dent repairs are going on.

S2k Dude

11-03-2004, 12:53 PM

If we can get 5 or 6 people together I'll setup the open house for this Saturday maybe from 1-4.

I'm sure the discounts will be worth it. Like I said in my first post, probably at least half of what dent wizard charges.

S2k Dude

11-03-2004, 12:55 PM

I have a few. December would be better for me.
Jeff, I'm sure you have an hour or two you can sacrifice to take advantage of the offer.

wpriller7

11-03-2004, 01:02 PM

You can count me in, if you get enough people. I will just need directions and time.:fro: Thanks

If we can get 5 or 6 people together I'll setup the open house for this Saturday. I'm sure the discounts will be worth it. Like I said in my first post, probably at least half of what dent wizard charges.

moyopoyo

11-03-2004, 01:11 PM

i'm interested also. i've got two dents on my passenger's side.

S2k Dude

11-03-2004, 02:15 PM

We've got about 5 people now, anyone else?

Modifry??? I remember you said you had a dent or two that needed some attention...

I called Precision dent and they would be available Saturday from 1PM - 4PM if we get a crowd of interested owners together. They also confirmed that a group discount would be offered. I need to confirm with them no later than Thursday afternoon so if anyone is on the fence please jump in.

suzukasue

11-03-2004, 02:35 PM

I have a huge ding in the drivers side door...but I wanted to keep it. It's a reminder of my 1st date with Wendy :D
I would just like to clarify that I, myself, didn't cause the dent! It happened on the day of our first date - one year and a day ago (11/02/03!).

S2k Dude

11-03-2004, 02:43 PM

Sorry, I'm not sure if S2kjones is kidding, do you want to spend ~$40 to get rid of the dent or not?

s2kjones

11-03-2004, 02:44 PM

I would just like to clarify that I, myself, didn't cause the dent! It happened on the day of our first date - one year and a day ago (11/02/03!).
I caused the dent while getting out of my car to fuel up at QT. I opened the door into one of their yellow post

s2kjones

11-03-2004, 02:45 PM

Sorry, I'm not sure if S2kjones is kidding, do you want to spend ~$40 to get rid of the dent or not?
It's my token dent. As soon as I get it fixed...I'll get another one. Screw it. I'm going for a drive this Saturday. Thanks for the offer though:goodjob:

F8d2Blk

11-03-2004, 02:51 PM

:nono:

I would just like to clarify that I, myself, didn't cause the dent! It happened on the day of our first date - one year and a day ago (11/02/03!).

tmelch

11-03-2004, 07:06 PM

Screw it. I'm going for a drive this Saturday. Thanks for the offer though:goodjob:Hey, dodrive in the morning, dedent in the afternoon!

s2kjones

11-04-2004, 07:26 AM

Hey, dodrive in the morning, dedent in the afternoon!
Sounds like too much work :D

S2k Dude

11-04-2004, 09:55 AM

Seems like too much going on this weekend with the SELOC meet at Discover Mills and the mountain drive. I was just trying to help everyone out by putting something together and get a group discount. Since I don't see a firm commitment from 6 other people I'll call Precision Dent and tell them not to bother with this Saturday.

If any of you want to use them give them a call, they do great work.

F8d2Blk

11-04-2004, 10:23 AM

Dewain27

11-04-2004, 07:52 PM

Just a FYI this weekend is not the SELOC meet... It is from another club.... The SELOC meet is on the 19th

modifry

11-04-2004, 11:41 PM

Sorry I'm late.

Put me down for at least 3 dings. No rush if we need to postpone it. If we can do a "dent day" that would be great, if only as an excuse to see y'all for a few hours.

S2k Dude

11-05-2004, 12:05 AM

I'll check the calendar, maybe next Saturday or Sunday.

Sebringer

11-05-2004, 08:05 AM

Hey Dave- just saw this. I'm good for one ding on my Pilot when this gets organized.

Thx. Great idea.

tmelch

11-05-2004, 09:57 AM

Let me know when and where!

S2k Dude

11-05-2004, 10:12 AM

We've actually got about 8 people that need a total of 14 dents removed. I think that would be enough business for Precision dent to do in an afternoon.

If most of those 8 people still want to shoot for this weekend I can still put something together for tomorrow.

Who thinks they can be available Saturday and when?

S2k Dude

06-21-2005, 10:01 AM

Though I'd revive this thread. Anyone wanting to do an organized group dent repair session. We would find a central location where we all could meet with the dent repair guy and have him do everyone's repairs at one time at a discount.

Who would like to participate?

S2KOOL

06-21-2005, 10:12 AM

I might depending on when and where. I have a small door ding that could use some attention.

S2KJD

06-21-2005, 10:58 AM

I have a dime size ding in my rear left and right fenders...count me in!!!

F8d2Blk

06-21-2005, 11:15 AM

Maybe interested too!

S2k Dude

06-21-2005, 11:16 AM

I'll update the top of the thread with everyone that needs the repair. I'll also contact Precision Dent and verify they will still be able to offer the discount.

YellowS2K

06-21-2005, 06:22 PM

I neeed chips repaired. Hood and bumper need some very small amount of repair. Anyone got a contact that is VERY good at this.

KatJ

06-21-2005, 06:34 PM

I'll update the top of the thread with everyone that needs the repair. I'll also contact Precision Dent and verify they will still be able to offer the discount.
I'm potentially interested too.

Glenard127

06-21-2005, 06:41 PM

I'm interested. I have a very small ding in the driver's side door. I'll even pull the interior door panel off myself.

Johnyboy

06-21-2005, 06:45 PM

Date and time are a factor, but I am definitely interested.

S2k Dude

06-21-2005, 11:15 PM

I'm potentially interested too. Great, how many dents do you have?

I'm interested. I have a very small ding in the driver's side door. I'll even pull the interior door panel off myself. They usually don't need the door panel removed, they go in between your side window and weather stripping. I've seen it done, it's very simple and nothing gets damaged.

Date and time are a factor, but I am definitely interested.
We could either set something up for next week (maybe at Franky's) or we could do it at Modifry's place if he's available and is willing to host. That's about as central as you can get.

KatJ

06-22-2005, 12:19 AM

I have one on the passenger rear, above the tire.

tonybell_57

06-22-2005, 12:19 AM

I've got 3 small dents that need removing. I'm interested.

ALS2000

06-22-2005, 01:58 PM

I am also interested. I have one on the quarter panel near the antenna.

S2k Dude

06-22-2005, 02:27 PM

Al, you never drive your car, your wife must have put a dent in it while it was in the garage. I'll put you down for one dent.

NAC

06-22-2005, 02:30 PM

I'm in depending on the date though. I've got three dents that need attention. Glad to see those low prices. Won't put much of a dent in my wallet!

ALS2000

06-22-2005, 02:42 PM

You are right Dave, I need to get out more. It looks like it was caused by leaning over to snap on the tonneau boot cover.

S2k Dude

06-27-2005, 05:27 PM

I contacted Jeremy and he's willing to meet us for a group dent removal. Since 6 of the 8 people listed are in Gwinnett I'd like to just set this up to be done at my house.

Since this coming weekend is July 4th weekend I think most people already have some plans. The following two weekends do not work for me either, the soonest we can set this up is July 23rd.

06-27-2005, 09:50 PM

I wonder if they would come out to NAC's which is also in Gwinnett while we BBQ and chill on July 3rd... I have 2 dents: passenger fender, pass. door.

06-27-2005, 09:51 PM

I've got 3 small dents that need removing. I'm interested.
and how long have you had your car, tony? :p

tonybell_57

06-27-2005, 10:19 PM

and how long have you had your car, tony? :pI got it in late September '04.

06-27-2005, 10:24 PM

I got it in late September '04.
oh...so it's been almost a year...i bought my 02 on 9/11/04!!!

tonybell_57

06-27-2005, 11:05 PM

oh...so it's been almost a year...i bought my 02 on 9/11/04!!!Wow! You got your's 1 week before I got mine (9/18/04).

06-27-2005, 11:25 PM

Wow! You got your's 1 week before I got mine (9/18/04).
awesome! let's get our dings fixed on the same day dude!!! (trying to get back on topic :D )

KatJ

06-27-2005, 11:25 PM

The weekend of the 23rd won't work for me but don't let that be a showstopper.

Actually, my car will be in town but I won't. I would let a fellow club member babysit it for the weekend but the thought reminds me of the parking garage attendants in Ferris Bueller's Day Off. :D

F8d2Blk

06-28-2005, 09:19 AM

23rd looks good for me.

S2KOOL

06-28-2005, 10:41 AM

If all goes well, I will be moving that weekend. Guess I will get it done another time.

F8d2Blk

06-28-2005, 11:28 AM

If all goes well, I will be moving that weekend. Guess I will get it done another time.
Where yah moving to?

suzukasue

06-28-2005, 02:12 PM

Where yah moving to?
Last I head, they were moving to Hoschton!

WebGod

06-28-2005, 02:33 PM

Last I head, they were moving to Hoschton!Where the hell is that?

suzukasue

06-28-2005, 02:40 PM

Where the hell is that?
Northeast of where you and I live.

S2KOOL

07-11-2005, 05:44 PM

Where yah moving to?
20 Miles further up I-85 to Hoschton in Jackson county.

3-bedroom ranch with basement on just under 2 acres.

More important, two car garage up, and two car garage in basement.:goodjob:

suzukasue

07-11-2005, 05:47 PM

20 Miles further up I-85 to Hoschton in Jackson county.

3-bedroom ranch with basement on just under 2 acres.

More important, two car garage up, and two car garage in basement.:goodjob:
WOW! That would be a dream come true for David and I. I've been on the lookout for the exact same thing! ...except it would be nice if it were closer in to town. Anyway, congrats! When is the house-warming (garage-warming?) party?!?

S2KOOL

07-11-2005, 05:58 PM

... When is the house-warming (garage-warming?) party?!?
Not anytime soon. One week after we move in, I leave for Tokyo for a 12-day trip. I'm back for two weeks then leave for a 1-week motorcycle trip to Panama City Beach and then on to New Orleans. I'm back one week then Jeremy gets married. Maybe sometime in October.

S2k Dude

08-18-2005, 06:08 PM

Sorry for not getting back on this. I was just contacted by Precision Dent asking when would be a good time to put this together. Next free weekend I have to host this September 3rd. Please post if you can make it over to Lawrenceville that day.

S2KJD

08-18-2005, 07:03 PM

F8d2civic

08-18-2005, 07:38 PM

3rd not good for us we'll be at Roebling with the Redline club.

S2k Dude

08-18-2005, 07:45 PM

3rd not good for us we'll be at Roebling with the Redline club.
Geez, that track day hasn't happend yet? Seems like this has been in the works for 3 months! Depending on further response we may choose another date. Stay tuned.

S2k Dude

08-18-2005, 07:47 PM

I should be able to make it but I want to know of course what I would be paying first and how beneficial the group discount will be?!?!

I have 2 dime size dings...one in the left rear fender and the other in the right rear fender....
Check the first post of the thread, I doubt you'll find a better price for dent removal of this quality. Precision dent did a great job on my car a while back.

Glenard127

08-18-2005, 07:58 PM

I'm out on the 3rd also.

word

08-19-2005, 10:13 AM

<--- in, 3-4 various sized dings.

S2KOOL

08-19-2005, 10:22 AM

I leave on my motorcycle trip on the 3rd.

S2KJD

08-19-2005, 11:28 AM

I would be in...:goodjob:

KMRJJ

08-19-2005, 11:48 AM

I need some work done. 2 door dings and a butt print on the right rear fender.
Sept 10 is about the only day I could make it between now and mid October.

S2k Dude

08-19-2005, 12:55 PM

I need some work done. 2 door dings and a butt print on the right rear fender.
Sept 10 is about the only day I could make it between now and mid October.
We may have to push the date out 'till then.

F8d2civic

08-19-2005, 01:29 PM

I think the 10th would be good for us too.

Sky

08-19-2005, 04:20 PM

Sept 10 is the monthly drive (which I'll be missing due to being out of town). I have 2 hard to see dents. One on each side just behind the door. Don't know where they came from but if they could be easily or inexpesively removed I would be interested.

S2KOOL

08-19-2005, 04:54 PM

And I will be returning from my motorcycle trip on the 10th or 11th.

S2KJD

08-21-2005, 06:24 PM

The 10th I have my sisters wedding so I know that will not work for me and I really want to get in on this discount since I have been wanting to remove these dings ever since I bought the S...

S2k Dude

08-21-2005, 10:34 PM

Seems like we aren't going to find a date that will please very many people.

S2KJD

08-22-2005, 09:43 AM

Then, I say stick to the original date and after that you can arrange for another meet weeks or months down the road...

F8d2civic

08-22-2005, 12:32 PM

I kindof agree, you could just go for the day the most people will show up for and then plan another one later if there are still quite a few people interested. I know Jeff is interested whether it be now or later.

KMRJJ

08-23-2005, 10:53 PM

Sept 10 is the monthly drive
My brain skipped a gear. I'm already signed up for the monthly drive.

Too much travel and work!

S2KJD

08-25-2005, 09:53 AM

Alright, is this thing to happen on the 3rd or has it been moved back, again? Since weekends don't work maybe odly enough a weekday would be better? I could pretty much do any weekday...

S2k Dude

08-25-2005, 09:58 AM

Maybe we should set this up for one of the Tues/Thurs dinners? People seem to be able to make it to those.

S2KJD

08-25-2005, 09:59 AM

Good point, but Joe might not like the interferance...check it out and see...I'm game!

Cyclon36

08-25-2005, 11:19 AM

Good point, but Joe might not like the interferance...check it out and see...I'm game!
That's fine with me. It's not like we all have to hold the guys hand to do it. We'll just leave him the keys and come back to dent free cars.

S2KJD

08-25-2005, 11:32 AM

Alright, lets make it happen then!:goodjob:

Although, I would want to be there probably during the enhancements:D

S2k Dude

08-25-2005, 12:10 PM

That's fine with me. It's not like we all have to hold the guys hand to do it. We'll just leave him the keys and come back to dent free cars.My thoughts exactly. Let's plan on doing the next Thursday dinner after we get back from the Dragon. I think that will be Thursday, September 8th.

S2KJD

08-25-2005, 12:27 PM

start a list ... I'm in!

S2k Dude

08-25-2005, 01:11 PM

Let me talk to Precision Dent and see if they are available before we make this a firm date.

S2KJD

09-02-2005, 10:41 AM

Let me talk to Precision Dent and see if they are available before we make this a firm date.
Any new updates???

S2k Dude

09-12-2005, 07:18 PM

Okay, I spoke with Jeremy and he's open to meet with the group, basically we just need to tell him when and where. I'd like to open up a couple of options:

1) Have him come by during this Thurday's dinner meet in Gwinnett. Only issue is he will only be able to do a few cars due to the sun going down in the evening.

2) Stop by his shop in Lawrenceville after the Panoz tour this coming Saturday. We should be done earlier in the day so he'd be able to do more cars if needed.

3) Lastly, have him stop by the next Thursday night dinner meet at Franky's. Again, limited on daylight so he can only do a few cars.

We can do all three if it works out that way. Bottom line is he wants our business and maybe we just establish a "club" discount per individual rather than a "group" discount.

I need some input from people here. How many people can we expect to see show up and want dent repair at any of the above three times?

KatJ

09-12-2005, 07:22 PM

2 or 3 work for me.

F8d2civic

09-12-2005, 07:43 PM

Jeff says 2 or 3 also, but more likely 3.

tonybell_57

09-12-2005, 07:49 PM

I've got 3 small dents that need removing. I'm interested.I decided to throw mine away and get another one. Yu can take me off the list:D

jrl459

09-12-2005, 08:11 PM

I decided to throw mine away and get another one. Yu can take me off the list:D how bout some dentless paint removal?

Super

09-12-2005, 08:24 PM

I decided to throw mine away and get another one. Yu can take me off the list:D
http://www.s2katlanta.com/%7Es2katl/forum/images/smilies/laughing-smiley-007.gif

tonybell_57

09-12-2005, 09:08 PM

how bout some dentless paint removal? :rolf: .

jrl459

09-12-2005, 09:20 PM

Thanks, I'll be here all week.

Grainger49

09-12-2005, 10:26 PM

how bout some dentless paint removal?
No thanks! I already have too much of that on the front. http://www.s2katlanta.com/%7Es2katl/forum/images/smilies/laughing-smiley-007.gif

S2KJD

09-13-2005, 10:06 AM

2) Stop by his shop in Lawrenceville after the Panoz tour this coming Saturday. We should be done earlier in the day so he'd be able to do more cars if needed.

This would be best:goodjob:

S2k Dude

09-13-2005, 10:14 AM

From the responses so far, we can plan on stopping by Precision Dent after the Panoz Tour (or if people want we can meet at my house and have Precision dent come to us).

And I'll tell Precision Dent to plan on stopping by Franky's on September 22nd for those that can't make it this weekend.

S2KJD

09-13-2005, 10:18 AM

Throw out a reminder on Saturday:goodjob:

Glenard127

09-13-2005, 11:08 AM

Approximately what time will you guys be there on Saturday?

S2k Dude

09-13-2005, 11:51 AM

Approximately what time will you guys be there on Saturday?
I'm not sure how long the Panoz tour is going to be but if it starts at 1:00 and is between 1-2 hours long that would put us there between 3:00-4:00 PM.

I'm thinking it would be easiest for us to meet at my house Saturday afternoon that way we can all relax and enjoy a cold one.

S2KJD

09-13-2005, 12:05 PM

meet at my house Saturday afternoon that way we can all relax and enjoy a cold one.
Where you live? You don't have to give specific directions over the board but a ballpark...:D

Grainger49

09-13-2005, 12:12 PM

Where you live? You don't have to give specific directions over the board but a ballpark...:D
Psssst, Jared. Look at the second line under Dave's avitar. The members have their location/home listed.

It is Larryville, up 85, but not quite to SC.

F8d2civic

09-13-2005, 02:31 PM

S2k Dude

09-13-2005, 03:43 PM

Dave, I wanted this guy to look at my car also and tell me what he thought I should do, the car has recently been painted and they body shop didn't take all the dents out that I asked them to...so I don't think it fixable but I don't know, I'm not asking for a club discount just an opinion and maybe I can take it to him later if it can be fixed. Its just disappointing to look at after the money I spent and I am going back to the place for paint chipage on my kit so I'll talk to them about it too. Doesn't hurt to ask or take it over to his shop. You can either bring it by on Saturday or give him a call and setup your own, personal appointment. I'm sure he'll still give you a good price.

Where you live? You don't have to give specific directions over the board but a ballpark...:D
I was thinking that people could just follow me over after the Panoz tour but I'll post directions in the "Confirmed Dates" thread.

S2KJD

09-13-2005, 04:05 PM

I was thinking that people could just follow me over after the Panoz tour but I'll post directions in the "Confirmed Dates" thread.
That's fine. I was just asking for the fact that if its far out of the way(as far as where I live) I would just get it done on my own time at their shop! I'll find out on Saturday:D

S2k Dude

09-13-2005, 04:25 PM

My house isn't out of the way from there unless your heading in the opposite direction. http://www.s2katlanta.com/%7Es2katl/forum/images/smilies/biggrin.gif

I'm just South of the Mall of GA.

Aaron

09-13-2005, 09:21 PM

i have nothing constructive to add to this thread

tonybell_57

09-14-2005, 12:01 AM

i have nothing constructive to add to this threadWay to PW, Aaron:goodjob:

Johnyboy

09-14-2005, 12:03 AM

i have nothing constructive to add to this thread
...and that's a change???

http://www.s2katlanta.com/%7Es2katl/forum/images/smilies/wink.gif

Super

09-14-2005, 12:03 AM

Way to PW, Aaron:goodjob: i have nothing constructive to add to this thread
http://www.s2katlanta.com/%7Es2katl/forum/images/smilies/grinning-smiley-003.gifhttp://www.s2katlanta.com/%7Es2katl/forum/images/smilies/grinning-smiley-003.gifhttp://www.s2katlanta.com/%7Es2katl/forum/images/smilies/grinning-smiley-003.gifhttp://www.s2katlanta.com/%7Es2katl/forum/images/smilies/grinning-smiley-003.gif

F8d2Blk

07-03-2006, 10:36 AM

Well I went to see Jeremy at Precision Dent and I have to say they do impressive work. I was very pleased. I don't know if you want to update the beginning thread. But I guess Chuck isn't a partner anymore. He mentioned taking his name off the post. But thanks David for the lead. I think we should have some sort of preferred vendor list for them. They don't necessarily have to give us a discount. But I think the prices are more than fair. Jeremy gave me a fair price plus mentioned a coupon online for $15 off. So :goodjob: :goodjob: :goodjob: !

afwfjustin

07-03-2006, 11:39 AM

Cyclon36

07-03-2006, 11:47 AM

F8d2Blk

07-03-2006, 11:49 AM

How much was it? I have a tiny tiny tiny dent in my driver's rear quarter panel that needs to be taken out. It's probably only 1/8 inch pressed in, and not creased anywhere - in fact it's hardly noticeable to people unless I point it out to them and they see it in the right light. Still it bothers me. Wouldn't cost too much right?

It probably would of been cheaper to have it done as a group when David did put this together. They do mention a minimum of $79 dollars but I would just take it to them and see. I paid $160(after coupon) for a softball size dent in the rear quarter that was right on the crease opposite of the gas door and a crease about 8 inches long on the door that was from someone hitting there door on my car.

Grainger49

07-03-2006, 12:30 PM

I found a place in Knoxville that is expanding to Atlanta. Called Dent Station Plus. They do paintless dent removal, curb rash repair, scratch and paint chip repair and winshield pit/chip repair.

We just got a "keep it new" deal for Paula's car. $500 for three years of everything. And looking at the rocks on the roads here plus the parking lot damage, it will pay for itself in a year. (One door ding $80)

You guys should look them up when they get there. Or I will tell you where they are going to open.

jameswh0

11-11-2006, 03:00 PM

Jeremy was great! Took out 2 HUGE dents in my front/rear bumper on my Landcruiser as well as the door dings! Can't even tell there was ever a problem. Total cost for the Cruiser was about $369... He also took out some (3) small dents in my S... beautiful work! I would highly recommend these guys! So if you see the picture of the Spa S in his shop with the BBS LM's... that is me.